Announcement

Collapse
No announcement yet.

How to: Remove dash panel

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BeefMasta
    replied
    Originally posted by Chriseyj View Post
    Just a quick question does anyone know if the dash panels are interchangeable throughout out the models. I'd like to try and fit a 2017 sat nav panel in a 2010 non sat nav.

    Thanks Chris
    Yes you can but you'd need to change the head unit and code it to your car too.

    Leave a comment:


  • Chriseyj
    replied
    Just a quick question does anyone know if the dash panels are interchangeable throughout out the models. I'd like to try and fit a 2017 sat nav panel in a 2010 non sat nav.

    Thanks Chris

    Leave a comment:


  • WTF
    replied
    Try the link in here
    http://www.ds3club.co.uk/forum/ds3/d...uments-for-ds3

    Leave a comment:


  • cyclone
    replied
    Originally posted by Ltodd98 View Post
    How come i cant view the photos?
    Ask those greedy bastards at photo bucket.

    Leave a comment:


  • Ltodd98
    replied
    How come i cant view the photos?

    Leave a comment:


  • Grantandrew2014
    replied
    cheers for the info fellas ill take it back to the dealer for them to have a look, its driving me insane :mad:

    Leave a comment:


  • Bigfeet
    replied
    A couple of Citroen Service documents for removing parts of the dashboard are present within the File Repository as well

    Leave a comment:


  • Dangerousfish
    replied
    Originally posted by BeefMasta View Post
    Pretty sure there is an info rapide for this, the dealer should fix it for you (they basically put some foam in to stop the rattle).
    There is

    http://mybrennan.co.uk/irs/affiche.pdf

    Leave a comment:


  • BeefMasta
    replied
    Originally posted by Grantandrew2014 View Post
    i may not ahve a choice but to give this a go, as soon as the car is warm the dash rattles just above the LCD screen :mad:
    Pretty sure there is an info rapide for this, the dealer should fix it for you (they basically put some foam in to stop the rattle).

    Leave a comment:


  • Jimbob
    replied
    Originally posted by WTF View Post
    Another amazing how to from www.ds3spirit.com With thanks to them and Eiken who brought these guides to our attention.

    Google translate, aplogies. [/B]
    "Aplogies" accepted!

    JB

    Leave a comment:


  • Grantandrew2014
    replied
    i may not ahve a choice but to give this a go, as soon as the car is warm the dash rattles just above the LCD screen :mad:

    Leave a comment:


  • WTF
    replied
    Thank you for the update

    Leave a comment:


  • Iain W
    replied
    I've just followed the instructions above, and they are pretty much spot on. The only thing I'd say is that I had another dash ready to replace my original, so when things refused to come apart I had another one to look at so I could suss out where to apply pressure and which direction.

    The most difficult parts to remove are the side airvents - my NS one just wouldn't come out and had almost given up - the knack I think is to use squeeze down the upper air vent bit whilst sort of rotating it down a bit. The gloss black / carbon fibre trim does come off the guts of the air vent, and will start to do so if you put a lot of pressure on it to force the vent out. Better to try and grip the vent itself as it's more substantial.

    The only casualty was a crack in the clear plastic cover which sits over the fuel tank / info display, where the clip that retains the bezels passes thru, and when I popped the clip it must have just dragged on the clear dial cover. Hopefully some superglue run into the crack will seal it up.



    Attached Files

    Leave a comment:


  • WTF
    started a topic How to: Remove dash panel

    How to: Remove dash panel

    Another amazing how to from www.ds3spirit.com With thanks to them and Eiken who brought these guides to our attention.

    Google translate, aplogies. But the photo's are fab.

    A little tutorial for those wishing to dismantle the dashboard to either change or modif to diverse
    So to start the cache must be removed by pulling the meter as shown in the photo (thank you for moutmout photos)

    After you must detach the leather part of the cache:


    Once the cache requires dismantling the meter removed the center console in black lacquered before continuing dismantling of the dashboard!

    So once the center console is removed may have to continue to remove the bulk of the dashboard!
    As shown in the picture must be drawn to the board is to detach:

    Once the start is detached will have to spend the hands behind the plate while pulling is to continue to unclip the rest.
    First, from above:

    Then from below:

    This time it is completely dismantled it is important not to forget to disconnect the two connectors of the button locking doors as well as the warning!


    A small photo of the back of the board:

    And a panel without the board:



    Original guide on DS3Spirit

    Photos and guide for reference, if you break it, don't blame me! Nor DS3club.co.uk. Just offering some help and guidance as to how you could remove your dash.
    Last edited by WTF; 27-06-2011, 21:20.
Working...
X