Announcement

Collapse
No announcement yet.

THP dpwnpipe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • THP dpwnpipe

    Hi to all!!

    Did someone order these downpipe:

    https://www.ebay.com/itm/200CPI-STAI...YAAOSweRpdkw~2

    Or does someone have advice is it ok?
    Price is ok

  • #2
    I would guess that will give you a warning light
    sigpic
    Jog on Noddy

    Comment


    • #3
      Hi BBZG ,

      There was someone earlier this week with the same downpipe which has caused alot of problems for him.

      My advice, look for a better quality downpipe and get the car remapped if necessary.

      Scorpion or Milltek

      See the topic here:

      http://www.ds3club.co.uk/forum/ds3/d...ts-at-5100-rpm

      Comment


      • #4
        Originally posted by DS3-NL View Post
        Hi BBZG ,

        My advice, look for a better quality downpipe and get the car remapped if necessary.

        Scorpion or Milltek
        Very good advice

        In the early days even Scorpion Sportscats gave lights
        Milltek/HJS were fine- pricey tho. Mine was 540 fitted onto my THP 1655, but the difference was fabulous

        sigpic
        Jog on Noddy

        Comment


        • #5
          TXH all for help, all is clear. Once more cheaper is not better and ds3club.co.uk rules!!!

          Will go with Milltek like 1st was planned.
          Anyone know where to get best price?

          Comment


          • #6
            Originally posted by BBZG View Post
            TXH all for help, all is clear. Once more cheaper is not better and ds3club.co.uk rules!!!

            Will go with Milltek like 1st was planned.
            Anyone know where to get best price?
            Ask Jamie: You may get a discount on this

            https://www.sptuning.co.uk/milltek-l...w-cat-ds3.html
            sigpic
            Jog on Noddy

            Comment


            • #7
              Chris_Blue DS3-NL

              I am at the moment at etuners stage 1 now going to stage 2.
              Remap, IC Cupra or Airtec, downpipe budget is up to
              200.
              So it will be between:
              https://www.sptuning.co.uk/scorpion-...npipe-ds3.html
              https://www.sptuning.co.uk/milltek-l...e-cat-ds3.html
              any recomendation how is Scorpion compared to Milltek?

              Jamie I send him PM waiting for answer.

              Once more time thx you all for help!!!

              Comment


              • #8
                If it is just the downpipe, it probably doesn't matter which one, but Milltek has a very good name, but so does Scorpion

                You will have to replace the catalytic converter to get past a UK MOT every year, and the downpipe will bring a RED EML light up, which will need mapping out

                The 200 cell sportscat passes the MOT
                sigpic
                Jog on Noddy

                Comment


                • #9
                  Hi BBZG ,

                  For the Decat it shouldnt matter between Scorpion or Milltek, if you're going to run with a sportscat i would choose for Milltek because they use catalytic converters from HJS which are very reliable and doesn't throw up any engine lights. Im currently running an Scorpion Decat DP with their non-resonated cat-back, which i got custom made with two valves, i can choose between full straight pipe and a nice and calm sound with the valves

                  For the intercooler i would choose for Airtec, not to expensive and comes with good quality. I am running also a Airtec IC with their boostpipe kit, the cupra IC doenst straight fit and you will have to cut into your frame to make it fit. Not a huge fan of cutting in a DS3

                  Definitely follow up Chris_Blue his advice. If you have any further questions i would like to answer them.​​​​​​​

                  Comment


                  • #10
                    Go for it BBZG
                    sigpic
                    Jog on Noddy

                    Comment


                    • #11
                      Still waiting for price inquiry for Scorpion downpipe from Jamie@SPTuning

                      Comment


                      • #12
                        Originally posted by BBZG View Post
                        Still waiting for price inquiry for Scorpion downpipe from Jamie@SPTuning
                        Would ring him up to chat about it- he doesn't get on here much nowadays
                        sigpic
                        Jog on Noddy

                        Comment


                        • #13
                          Hi, i've got exactly that 200cell DP.

                          After install i've got engine check lights ON. Also i have another issue with boost cut off...but to get back to your Question.

                          You have a nice exhaust professionals in Zagreb: https://www.milletechnology.com/our-work/

                          they use HJS cats, which are not cheap, but work like a charm

                          I'm also waiting an inquiry from them...and i'm sure i will schedule a visit there!

                          Comment


                          • #14
                            Originally posted by djsly View Post

                            use HJS cats, which are not cheap, but work like a charm
                            Correct!

                            sigpic
                            Jog on Noddy

                            Comment


                            • #15
                              etuners stage 2 is ready on my laptop just to mention all recommendation for Stelios!!!

                              Chris_Blue will go with Scorpion decat because of price and comparation to Milltek instead of eBay s*it and once per year swap with OEM for MOT not problem

                              BTW how to add pictures here?

                              DS3-NL so you have this downpipe and you are happy with it?
                              https://www.scorpion-exhausts.com/ci...ownpipe-de-cat

                              Will go with Cupra FMIC no problem with space cause I have 308 THP but I found ds3club forum great with lots of good themes considering THP and is friendly
                              https://www.ebay.co.uk/itm/163860962058

                              Can any one help me with size of pipes for it?

                              djsly thx for that, Milletech looks good will call them tomorrow, let se about price. If you are coming to visit them we have to meet there.

                              Comment

                              Working...
                              X